preloader
Bize Ulaşın
Pamukyazı Mahallesi 8. Cadde
No:15 Torbalı
İzmir / TÜRKİYE
İletişim Bilgileri
Telefon +90 232 863 41 64 (pbx)
Faks +90 232 863 41 67
E-Posta info@doganaytugla.com
In stock

Surface Protector and Polisher

SKU: YKP Category:
Product Code : YKP
Packaging Style 1 Lt. Plastic Packaging
Storage Life : 6 Months

Suitable for brick, tile and terra cotta surfaces, You with partial absorption (penetration), long-lasting, wet and / or glossy appearance Depending on the surface type, suitabl for use in interior and exterior Surfaces and all climatic conditions, high UV stability, Gives good solvent-based preservative that water and dirt repellency.
Application
Before application, the package should be shaken well and a test application should be made in a small area. The Surfaces to be Applied must be clean, dry and free from contaminants such as Applied thinly protectors that joint Residues. DOĞANAY SURFACE PROTECTOR AND POLISH is Applied to the surface in a thin layer and evenly distributed by spraying, cotton sponge or paint. If there is insufficiente income, a second layer can be Applied.
Doganay Surface Protector and Polisher will penetrate within 10 – 15 minutes and reach the pre-protection level. The Applied surface Becomes ready for foot traffic within 3 – 6 hours. To achieve the best result, the surface should be kept dry and free from contaminating effects for 12 – 24 hours.
Consumption: Protection / Coating Area
5-15 Depending on the structure of the Applied surface, porosity, weather conditions and application method. It protects the surface between m². This value is 1 kg. It is valid for single coat application with Doganay Surface Protector and Polisher.
Storage and Shelf Life
Doganay Surface Protector and Polisher contains flammable petroleum derivatives. In order to avoid toxic effects, appropriati to work clothes and gloves should be used in well-ventilated areas and the product should be kept away from flame and excessive heat sources. The packaging should be closed tightly after each use and only the original packaging of the product should be used for storage. Application and storage should be between 4-38 ° C and should be protected from direct sunlight.
During use and storage, direct contact with skin, eyes and food materials should be avoided. The shelf life of the product from the packaging date is 6 months under the above-mentioned storage conditions.

Warnings During use and storage, direct contact with skin, eyes and food materials should be avoided. In case of contact with eyes, rinse with plenty of water and seek medical advice immediately. In case of contact with skin, wash with soap and water. In case of heavy breathing, move the person to fresh air immediately. SYMPTOMS If persist, call a doctor immediately. Do not force vomiting in case of swallowing, drink 3-4 glasses of water and call a doctor.
Description
Technical and practical information about the user of the products is based on our scientific knowledge and experience. No liability is accepted for errors that may occar during preparation and application. The person or organization related to the applications Eorope is responsible for checking whether or suitabl for their products are to complete.

bizi instagramda takip etmeyi unutmayın